This shows you the differences between two versions of the page.
Both sides previous revision Previous revision Next revision | Previous revision | ||
2001_saturn_sl2_serpentine_belt_tensioner_problems [2011/10/17 03:25] Joel Dare |
2001_saturn_sl2_serpentine_belt_tensioner_problems [2016/02/03 21:44] Joel Dare [A Larger Pulley] |
||
---|---|---|---|
Line 47: | Line 47: | ||
===== A Shorter Belt ===== | ===== A Shorter Belt ===== | ||
- | The next though I had was to purchase a smaller belt. I was using a 778 belt, which is 77.8" long. Since I need another 7/8" of movement, I thought I'd get something 1/2" to 1" shorter. I had 3 parts stores check inventory and the next smaller size went all the way down to 755 (2" shorter). That isn't going to work. | + | The next thought I had was to purchase a smaller belt. I was using a 778 belt, which is 77.8" long. Since I need another 7/8" of movement, I thought I'd get something 1/2" to 1" shorter. I had 3 parts stores check inventory and the next smaller size went all the way down to 755 (2" shorter). That isn't going to work. |
===== A Larger Pulley ===== | ===== A Larger Pulley ===== | ||
- | So, my final though was to increase the size of one of the pulleys. As I had previous pulled all these parts I had noticed that the idler pulley was a little less than 1/2 an inch larger than the tensioner pulley. The after market Idler Pulley was also metal, like the original OE tensioner pulley. | + | So, my final thought was to increase the size of one of the pulleys. As I had previous pulled all these parts I had noticed that the idler pulley was a little less than 1/2 an inch larger than the tensioner pulley. The after market Idler Pulley was also metal, like the original OE tensioner pulley. |
I decided to buy a second Idler Pulley and see if it would fit on the tensioner. It did fit and after the serpentine belt was re-routed I noticed that my previous mark was now about 5/8" away from the stop. This fix had worked and all the parts are easily attainable if I need another replacement in the future. | I decided to buy a second Idler Pulley and see if it would fit on the tensioner. It did fit and after the serpentine belt was re-routed I noticed that my previous mark was now about 5/8" away from the stop. This fix had worked and all the parts are easily attainable if I need another replacement in the future. |