Learn to Code by Making Art
Learn programming while your create computer art by copying code from my free guide.
https://splashofcode.com

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
installing_husqavarna_3d_embroidery_on_windows_vista [2016/05/20 18:00]
Joel Dare
installing_husqavarna_3d_embroidery_on_windows_vista [2016/05/20 19:25]
Joel Dare
Line 1: Line 1:
-====== Installing Husqvarna 3D Embroidering on Windows Vista, ​ Windows 7, or Windows 8 ======+====== Installing Husqvarna 3D Embroidering on Windows Vista, Windows 7, Windows 8, or Windows 10 ======
  
 I've spent a few hours trying to get the 3D Husqvarna Embroidering system installed under Windows. ​ It took a lot of wrestling but here's how I got it to work.  Hopefully, with these instructions,​ you'll find it much easier than I did. I've spent a few hours trying to get the 3D Husqvarna Embroidering system installed under Windows. ​ It took a lot of wrestling but here's how I got it to work.  Hopefully, with these instructions,​ you'll find it much easier than I did.
  
-I've now tried this myself on lots of machines and had quite a few reports of success from users. These instructions work under Windows 8, Windows 7, and Windows Vista. I've gotten reports from "Home Edition",​ "​32-bit",​ and "​64-bit"​ users. Chances are good that it will work for you in any version of Windows.+I've now tried this myself on lots of machines and had quite a few reports of success from users. These instructions work under Windows 10, Windows 8, Windows 7, and Windows Vista. I've gotten reports from "Home Edition",​ "​32-bit",​ and "​64-bit"​ users. Chances are good that it will work for you in any version of Windows.
  
 Contrary to the original instructions,​ you should connect the dongle to the computer before following these steps. If you already have the software installed, it's a good idea to uninstall everything first. Contrary to the original instructions,​ you should connect the dongle to the computer before following these steps. If you already have the software installed, it's a good idea to uninstall everything first.
Learn to Code by Making Art
Learn programming while your create computer art by copying code from my free guide.
https://splashofcode.com
comments powered by Disqus
installing_husqavarna_3d_embroidery_on_windows_vista.txt · Last modified: 2016/05/20 19:25 by Joel Dare